Archive

Posts Tagged ‘AppController’

#XenMobile on Android and MicroVPN issue unless you really synch Worx releases…

February 26, 2014 Leave a comment

Hi,

If you’ve worked with XenMobile and especially the AppController to deploy WorxMail and WorxWeb you know that these establish  a MicroVPN tunnel to reach internal resources when needed.

One thing that I noted today was that when you upgrade your AppController and NetScalers and people also upgrade their Worx Home app on Android you can run into an issue unless you upgrade and align your Worx Home and WorxWeb apps.

The new Worx Home 8.6.1 on Android requires that you run WorxWeb 1.3.3 from Citrix, otherwise the MicroVPN tunnel won’t be established and you won’t reach your internal resources through it.

So it’s more important than ever to ensure that you try your NetScaler, AppController and Worx apps and align their releases.. once they work then you see this great progress and tunnel being established.

Android_MicroVPN_tunnel_established

It would be nice to get a good table of which versions of each product/component that you should run and which ones that can support all use cases like; XenMobile , ShareFile on prem, ICA/HDX proxy, SSL VPN and SmartAccess for RfW and proxy! I’ve not yet found one combination that delivers everything. 😉

Happy XenMobile’ing!

//Richard

How to: #Citrix #XenMobile 8.5 MAM upgrade! Part 2 – #StoreFront, #AppController, #NetScaler

September 9, 2013 1 comment

Hi again!

If you haven’t read Part 1 then I highly recommend doing so prior to going directly to the upgrade that we’re covering in this post!

Prepare for a journey in this post about Citrix StoreFront upgrade, uninstallation, console and how messy it could be! NOT all the time, sometimes it “just works”! 😉

My little NetScaler is already upgraded to 10.1 so unfortunately I couldn’t take you on that journey as well, so we’ll start with the StoreFront upgrade from 1.2 to 2.0 in this post. These are the steps that we need to cover as highlighted in the migration guide that seems very short and straight forward:

Upgrade StoreFront 1.2 to 2.0.

  1. Logon to the StoreFront server console.
  2. Upgrade StoreFront by running the StoreFront 2.0 installer as an administrator.
  3. When the upgrade is completed, open StoreFront administration snap-in, remove CloudGateway controller from each store as this will be moved in the migration solution.
  4. Open NetScaler Gateway Properties and for each gateway defined and change the version field in settings from 9.x to 10.0.x or later.
  5. Test the configuration by logging on through web browser or Citrix Receiver.
  6. Verify if the users are able to login and authenticate to StoreFront defined stores configured.

Is it this easy?

Ok, I’ve downloaded the 2.0 installer, and I’m logged on to the server.

Before we even start the upgrade there are things that could go wrong in removal or upgrades of StoreFront. And one that I’ve seen cause a lot of headache for a lot of people out there is that they have the Windows Firewall service disabled. Though the installation and removal wants to delete or add these rules the installation will fail unless this service is running. As you can see in this picture below you see the FW rule added in StoreFront 1.2:

Windows_FW_Rules_SF1

So let’s verify that the Windows FW service is started, and it is!

Windows_FW_SVC_started

I’ll now start the installation by double-clicking the StoreFront 2.0 installer!

StoreFront_2_0_Installer

What is this popup that came directly after starting the installer?

Receiver_HTML5_popup_installation

Wait, ok so you guys at Citrix couldn’t ask me whether you could do this for me? My plan is to upgrade, so please just add a little step in your upgrade program that does this for me… change request #1 for the next SF release and it’s upgrade process! Verify pre-requisites or deal with them!

Read more…

#Citrix #XenMobile 8.5 MAM upgrade! Part 1 – #StoreFront, #AppController, #NetScaler

September 1, 2013 7 comments

In this little blog series series you’ll follow a little upgrade process to XenMobile 8.5 for Mobile Application Management (previously known as CloudGateway).

Ok, I don’t exactly know where to begin. I must first say that Citrix is THE master when it comes to renaming products, updating/changing the architecture, changing consoles (claiming to reducing the number of them like every year but at the same time introduce new ones).

How hard can it be to make crystal clear documentation and upgrade processes that works and are easy? I feel already that my tone in this blog post is “a bit” negative… but I think that Citrix actually deserves it this time.

I must now take a step back and calm down and point out that Citrix is delivering some MAJOR changes and good news/features in the new XenMobile 8.5 release though! It’s great (when you’ve got it up and running) and I must say that I don’t see anyone that is near them in delivering all these capabilities in a nice end-to-end  delivery!! 🙂

Have a look at everything that is new, deployment scenarios etc. here before you even start thinking to upgrade or change your current NetScaler, StoreFront and AppController environment!

Once you’ve started to read the different design scenarios you’ll see that App Controller can be placed in front of StoreFront, in the back of StoreFront or totally without StoreFront… all the options just make your head spin! Because Citrix doesn’t really make it clear on how all of this should work with a Receiver and Worx Home depending if the device is on the internal network, external through NetScaler or what the capabilities that you need are supported in the different scenarios in a simple way, just text that explains it. And I find the pictures and text a bit misleading:

You can include StoreFront in your deployment, which allows users access to published applications from XenApp and virtual desktops from XenDesktop, along with apps configured in App Controller. When users log on with Citrix Receiver, all of their apps appear in the store. The following figure shows how you can deploy NetScaler Gateway, App Controller, and StoreFront in your network.

Deploying App Controller with StoreFront and NetScaler Gateway

As you see above the App Controller is added as a “Farm” just as in 2.6, but is that the truth now in version 2.8 of App Controller?

If you have a look at the text from this page it’s getting even more confusing: Read more…

10 Mobile Device Management Leaders That Help IT Control #BYOD, #Gartner, #Citrix, #MDM

Consumers love their smartphones and tablets, so it should come as no surprise that they want to use their devices at work. The pressure to develop and deploy a bring-your-own-device (BYOD) policy is on and coming from every direction, including the ‘C’ suite of executives who tend to be especially keen on using smartphones and tablets for their work.

Managing devices in a BYOD environment is no small feat, and the right mobile device management (MDM) product is a key component in making it work. Here are 10 leading MDM vendors in the market today, drawn from the leaders and visionaries in Gartner’s 2013 Magic Quadrant for Mobile Device Management Software.

Magic Quadrant

Figure 1. Magic Quadrant for Mobile Device Management Software
Figure 1.Magic Quadrant for Mobile Device Management Software

 
 

Source: Gartner (May 2013)

Continue reading here!

//Richard

 

#XenDesktop 7 and #AppController setup – #Citrix, #MAM – via @msandbu

Good job on this blog post by Marius Sandbu!

XenDesktop 7 setup and AppController setup

So the big day is here, XenDesktop 7 is released from Citrix and with it ends the old XenApp architecture. 
Support for Server based session hosts is still there but the architecture is merged into XenDesktop.

Other features include:
App-V integration
License console integrated into Studio
Storefront administration also from the same console.
The list goes on and pictures say more than a thousand words.

(Can also say that Citrix also released a new version of the Receiver platform for both Mac and Windows today, which includes support for XenDesktop 7 and Storefront.

http://blogs.citrix.com/2013/06/25/receiver-for-windows-4-0-released-today/
http://blogs.citrix.com/2013/06/25/whats-new-with-receiver-for-mac-11-8/

XenDesktop 7 can be downloaded from Mycitrix.com à

http://www.citrix.com/downloads/xendesktop.html

Now the installation is pretty straight forward just choose Standard delivery controller install and it will include all of the needed components. After they are installed we need to create a deployment.
When you start Desktop Studio we choose create new deployment.

So we create a new site…

Continue reading here!

//Richard

Configuring Email-Based Account Discovery for #Citrix #Receiver

Check out this great blog post from Avinash Golusula:

Configuring Email-Based Account Discovery

1     Add DNS Service Location (SRV) record to enable email based discovery

During initial configuration, Citrix Receiver can contact Active Directory Domain Name System (DNS) servers to obtain details of the stores available for users. This means that users do not need to know the access details for their stores when they install and configure Citrix Receiver. Instead, users enter their email addresses and Citrix Receiver contacts the DNS server for the domain specified in the email address to obtain the required information.

To enable Citrix Receiver to locate available stores on the basis of users’ email addresses, configure Service Location (SRV) locator resource records for Access Gateway or StoreFront/AppController connections on your DNS server. If no SRV record is found, Citrix Receiver searches the specified domain for a machine named “discoverReceiver” to identify a StoreFront/AppController server.

You must install a valid server certificate on the Access Gateway appliance and StoreFront/AppController server to enable email-based account discovery. The full chain to the root certificate must also be valid. For the best user experience, install either a certificate with a Subject or Subject Alternative Name entry of discoverReceiver.domain, or a wildcard certificate for the domain containing your users’ email accounts.

To allow users to configure Citrix Receiver by using an email address, you need to add a SRV record to your DNS zone.

  • Log in to your DNS server
  • In DNS > Right-click your Forward Lookup Zone
  • Click on Other New Records
  • Scroll down to Service Location (SRV)
  • Configuring Email-Based Account Discovery
  • Choose Create Record

Working with #XenMobile #AppController and Me@Work apps – #Citrix, #BYOD

February 28, 2013 1 comment

I got to play around with @WorkWeb and @WorkMail apps a bit… and I must say that the process to get the Me@Work apps into AppController isn’t the simplest there is for someone that haven’t been doing iOS app development before.

But what I’m describing here is what’s now named XenMobile AppController and a part of the XenMobile bundle:

XenMobile_Architecture

(Note: picture from Citrix)

So lets try to summarise the steps involved in getting these @WorkWeb and@WorkMail apps into your AppController and then published them to your users!

  1. Get your hands on a Macbook!
  2. Download the App Preparation Tool for iOS Applications and install it on the client
  3. Download and install Xcode (not 100% necessary but I recommend that you do that to simplify the creation/download of Distribution certificates and Distribution Profiles)
  4. Open XCode and open Preferences->Downloads,Xcode_Preferences_download_command_line_tools Read more…
%d bloggers like this: