Archive
Single File Restore – Fairy Tale Ending Going Down History Lane – via @Nutanix and @dlink7
Great blog post by Dwayne Lessner!
If I go back to my earliest sysadmin days where I had to restore a file from a network share, I was happy just to get the file back. Where I worked we only had tape and it was crapshoot at the best of times. Luckily, 2007 brought me a SAN to play with.
The SAN made it easier for sure to go back into time and find that file and pull it back from the clutches of death by using hardware based snapshots. It was no big deal to mount the snapshot to the guest but fighting with the MS iSCSI initiator got pretty painful, partly because I had a complex password for the CHAP authentication, and partly because clean-up and logging out of the iSCSI was problematic. I always had ton of errors, both in the windows guest and in the SAN console which caused more grief than good it seemed.
Shortly after the SAN showed up, VMware entered my world. It was great that I didn’t have to mess with MS iSCSI initiators any more but it really just moved my problem to the ESXi host. Now that VMware had the LUN with all my VMs, I had to worry about resignatureing the LUN so it wouldn’t have conflicts with the rest of production VMs. This whole process was short lived because we couldn’t afford all the space the snapshots were taking up. Since we had to use LUNS we had to take snapshots of all the VMs even though there were a handful that really need the extra protection. Before virtualization we were already reserving over 50% of the total LUN space because snapshots were backed by large block sizes and ate through space. Due to the fact that we had to snapshot all of the VMs on the LUN we had to change the snap reserve to 100%. We quickly ran out of space and turned off snapshots for our virtual environment.
When a snapshot is taken on Nutanix, we don’t copy data, nor do we copy the meta-data. The meta-data and data diverge on a need basis; as new writes happen against the active parent snapshot we just track the changes. Changes operate at the byte level which is a far cry from the 16 MB I had to live with in the past.
Due to the above-mentioned life lessons in LUN-based snapshots, I am very happy to show Nutanix customers the benefits of per-VM snapshots and how easy it to restore a file.
To restore a file from a VM living on Nutanix you just need to make sure you have a protection domain set up with a proper RPO schedule. For this example, I created a Protection Domain called RPO-High. This is great as you could have 2,000 VMs all on one volume with Nutanix. You just slide over what VMs you want to protect; in this example, I am protecting my FileServer. Note you can have more than one protection domain if you want to assign different RPO to different VMs. Create a new protection domain and add 1 VM or more based on the application grouping.
Why no Snaphot feat. on NetScaler like on AG? – #Citrix, #NetScaler
Ok, I had the “pleasure” to be working with an Access Gateway setup a little while ago… and I don’t know if I should actually say that it was a pleasure when I all did was missing the NetScaler.
But there is one feature that Access Gateway has that NetScaler doesn’t that I like and see a need for; Snapshots!
Why hasn’t Citrix build the same EASY way to make a snapshot of a config on NetScaler??? This would simplify things a lot from a change management point of view. You could of course make this happen yourself but need to be savvy and it’s hazzle… It would also ensure that admins that aren’t hardcore NetScaler nerds actually could get some confidence to change stuff and have a back out plan to revert to a previous snapshot if something goes wrong.
And the great thing about a snapshot is that it represents all the Access Gateway settings, licenses, and certificates at a specific time. If you have multiple software versions installed on Access Gateway, you can have snapshots that span the different software versions. Imagine if there was a button you could press to do that done on the NetScaler!
Video of how it works: How To: Take and Restore Snapshots on Citrix Access Gateway 5.0
Creating Snapshots to Manage Access Gateway Configuration Settings
I think that this will be a good thing to add now when more shops will setup Access Gateway Enterprise on NetScaler and only use it for just that…especially now when it’s also going End of Life (EOL).
Citrix: Please make this happen! 😉
//Richard
The IT Melting Pot! 