Home > All, Hyper-V > #Hyper-V 2012 R2 Network Architectures Series (Part 1 of 7) – Introduction

#Hyper-V 2012 R2 Network Architectures Series (Part 1 of 7) – Introduction

This is a great blog post series! Good job Cristian Edwards!

Hi Virtualization gurus,

Since 6 months now, I’ve been working on the internal readiness about Hyper-V Networking in 2012 R2 and all the options and functionalities that exists and how to make them work together and I realize that a common question in our team or from our customers is what are the best practices or the best approaches when defining the Hyper-V Network Architectures of your Private Cloud or your Virtualization farm. Hence I decided to write this series of posts that I think they might be helpful at least to do the brainstorm to find the best approach for every particular scenario. The reality is that each environment is different and use different hardware, but at least I can help you identify 5 common scenarios on how to squeeze the performance of your hardware.

I want to make clear that there is no just one right answer or configuration  and your hardware can help you determine the best configuration for a robust, reliable and performer Hyper-V Network Architecture.  Please note that I will do some personal recommendation based on my experience. These recommendations might or might not be the official – generic recommendations from Microsoft, so please call you support contact in case of any doubt.

The series will contain these post:

1. Hyper-V 2012 R2 Network Architectures Series (Part 1 of 7 ) – Introduction (This Post)

2. Hyper-V 2012 R2 Network Architectures Series (Part 2 of  7) – Non-Converged Networks, the classical but robust approach

3. Hyper-V 2012 R2 Network Architectures Series (Part 3 of  7) – Converged Networks Managed by SCVMM and Powershell

4. Hyper-V 2012 R2 Network Architectures Series (Part 4 of 7 ) – Converged Networks using Static Backend QoS

5. Hyper-V 2012 R2 Network Architectures Series (Part 5 of 7) – Converged Networks using Dynamic QoS

6. Hyper-V 2012 R2 Network Architectures Series (Part 6 of 7 ) – Converged Network using CNAs

7. Hyper-V 2012 R2 Network Architectures Series (Part 7 of 7 ) – Conclusions and Summary

8. Hyper-V 2012 R2 Network Architectures (Part 8 of 7) – Bonus

Continue reading here!

//Richard

 

  1. No comments yet.
  1. No trackbacks yet.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: